Evaluation Boards
Sales Support link to Sales@memsic.com or call 1207-738-0900 Ext. 238MXEB-002 L Basic Board -- Digital or Analog
(For MXx2000 Series products)This low cost, basic evaluation board has the minimum required components and layout consideration to insure proper operation for the accelerometer. The user can quickly connect via edge fingers to a power supply and a volt meter for quick evaluation of the dual axis devices. Please reference the board schematic and data sheets for details.
Application Guide - Wiring Schematic
Note: accelerometer not included with board.
MXEB-003 L Basic Board
(For MXx6000 and 7000 Series products)This low cost, basic evaluation board has the minimum required components and layout consideration to insure proper operation for the accelerometer. The user can quickly connect via edge fingers to a power supply and a volt meter for quick evaluation of the dual axis devices. Please reference the board schematic and data sheets for details.
Application Guide - Wiring Schematic
Note: accelerometer not included with board.
MXEB-S-002 Socketed Board
(For MXx2000 Series products)These evaluation boards allow the user to test multiple devices easily with the addition of test sockets. Also, these boards offer easy access to the dual axis output pins. The boards have an external operational amplifier and external digital output PWM converter. With a power supply and an oscilloscope the user can be evaluating many aspects of the dual axis devices within minutes. Please reference the schematics and application note.
Note: accelerometer not included with board.
MXEB-S-003 Socketed Board
(For MXx6000 or MXx7000 Series products.Please indicate which Series do you want in your order.)These evaluation boards allow the user to test multiple devices easily with the addition of test sockets. Also, these boards offer easy access to the dual axis output pins. The boards have an external operational amplifier and external digital output PWM converter. With a power supply and an oscilloscope the user can be evaluating many aspects of the dual axis devices within minutes. Please reference the schematics and application note.
The board has a RS232 connection .The users can evaluate PWM output accelerometers with Gforce-Lab.
Note: accelerometer not included with board.
MXEB-232-001 Evaluation Board w/ RS232 Connection
(For MXx2000 Series products)The MXEB-232 is an evaluation board that has the capability of data-logging and is offered complete with all required software and hardware. Click on board for enlarged view in separate window.
MXEB-232-003 Evaluation Board w/ RS232 Connection
(For MXx6000 or MXx7000 Series products. Please indicate which Series do you want in your order.)The MXEB-232 is an evaluation board that has the capability of data-logging and is offered complete with all required software and hardware. Click on board for enlarged view in separate window.
LED Tilt Motion demonstration board
This tilt &motion demonstration board allows the user a quick illustration of how an accelerometer, or inertial sensor is used to measure tilt or inclination, shock or vibration, or inertial acceleration. Any application that requires the control or measurement of motion is a potential application for accelerometers and can be realized with a hand gesturing of this demonstration board.
The user can rotate the board clockwise and counterclockwise +/- 90 degrees and hold at the +/- 90 degree positions and see the entire leg of LED's"ON". This represents the +/- 1.0 g position due to gravity (static mode). The user can also shake the board in a forward and backward motion strobing LED's "ON" and "OFF" following the hand gesturing.
